Our Products

 

  Showcase

 

Foot Valve

 

1542136894img1

FOOT VALVE is a device which allow to come the flow in one direction. This type of valves are generally placed at the lower end of suction pipe of pump to prevent the suction pipe from empting while the pump is stop. Consequently when the pump is first started it dose not have to exhaust the air from the suction pipe as a result that prompt starting of the pump is secured.


v  PARENT / BASIC MATERIALS  :  CAST IRON, S.G. IRON, CAST STEEL, STAINLESS STEEL
v  TYPE OF CONSTRUCTION   :  FLANGE END / SCREWED END, LIFT / SWING TYPE DISC FOOT CHECK VALVE WITH C.I. / M.S. STRAINER
v  MANUFACTURING STANDARD  :   IS: 4038, IS: 10805
v  GENERAL FLUID APPLICATION  :  CLEAR WATER, GAS, AIR, OIL, CHEMICAL ETC.
v  END FLANGE STANDARD  :  IS: 1538, IS: 6392, BS: 10, ANSI B 16.1, ANSI B 16.5, BS: 4504, AWWA C 207 OR ANY OTHER STANDARD
v  TYPE OF DSC  :   SINGLE DISC SWING AND LIFT, DOUBLE DISC SWING AND LIFT
v  MANUFACTURING RANGE  :   NB 25 MM TO 450 MM
v  RATING  :  PN-2, PN-16 & PN-10
v  STRAINING AREA  :   AT LEAST EQUAL TO 2.5 TIMES OF THE NOMINAL BORE AREA





View More products
1542038018img1
Double Flanged Non-Rising Sluice Valve
SLUICE VALVES is a device to isolate the flow of medium in both directions. In a robust body two nos. body seat ring are fitted in the flow path. A wedge moves inside the body of guided by integral channel. The stem and stem-nut engage the wedge properly. At the time of wedging action the contracting seating surface effect the sealing and ensuring leak proof sealing. In full open position it facilitate clear uninterrupted full bore flow path resulting minor/low headloss.v  PARENT/BASIC MATERIAL  : CAST IRON, S.G. IRON, CAST STEELv  TYPE OF CONSTRUCTION  : INSIDE SCREW, NON-RISING STEMv  MANUFACTURING STANDARD  : IS: 14846, BS: 5150, BS: 5163, BS:1735,     API:600, AWWAC500, DIN: 3352 v  GENERAL FLUID APPLICATION  : CLEAR WATER, GAS, AIR, OIL, CHEMICAL ETC.v  END FLANGE STANDARD  : IS: 1538, IS: 6392, BS: 10, ANSI B 16.1,     ANSI: B16.5, BS: 4504, AWWA C 207 OR ANY     OTHER STANDARDv  TYPE OF WEDGE  : SOLID & TAPER, FLEXIBLE, SINGLE DISC.v  MANUFACTURING RANGE OF SIZE  : NB 40 MM TO 2500 MM v  RATING  : PN 0.4, PN-1.0 & PN-1.6
Read More...
1542038587img1
Double Flanged Rising Sluice Valve
GATE VALVE is a device to isolate the flow of medium in both directions. In a robust body two nos. body seat ring are fitted in the flow path. A wedge moves inside the body guided by integral channel. The stem & stem nut engage the wedge properly. At the time of wedging action the contracting seating surface effect the sealing and ensuring leak proof sealing. In full open position it facilitate clear uninterrupted full bore flow path resulting minor / low headloss.v  PARENT/BASIC MATERIALS  :  CAST IRON, S.G. IRON, CAST STEEL v  TYPE OF CONSTRUCTION  :  OUTSIDE SCREW, RISING STEM v  MANUFACTRUING STANDARD  :       IS: 14846, BS: 5150, BS: 5163,     BS: 1735, API: 600, AWWA C 500, DIN: 3352,v  GENERAL FLUID APPLICATION  : CLEAR WATER, SEWAGE WATER, GAS, AIR, OIL, CHEMICAL, INDUSTRIAL WATERv  END FLANGE STANDARD  :  IS: 1538, IS: 6392, BS: 10, BS: 4504, ANSI: B 16.5, ANSI: B 16.1, AWWA C 207 OR ANY          OTHER STANDARDv  TYPE OF WEDGE :  SOLID & TAPPER, FLEXIBLE, DOUBLE DISCv  MANUFACTURING RAGE OF SIZE: NB 40 MM TO 2500 MM
Read More...
1542133895img1
Swing Type Non Return Valves
Swing type REFLUX VALVE is a device which restrict the flow in one direction only. Any tendency for the flow to reverse causes the flap come close preventing reflux of flow. Valve generally open through help of velocity of upstream flow. The conventional swing check valves are used in horizontal or vertical system. “KAMALA / KCE” Brand check valves are hydro dynamically proven and specially developed for modern conditions on pump discharge and public utility service.v  PARENT/BSIC MATERIAL  :   CAST IRON, S.G. IRON, FABRICATED STEEL, CAST  STEELv  TYPE OF CONSTRUCTION  :   SWING CHECK, LIFT CHECK, SILENT PUSHY, TILTIL DISCv  MANUFACTURING STANDARD  :   IS: 5312, PART-I, BS: 5153, BS: 1868     v  GENERAL FLUID APPLICATION  :   CLEAR WATER, SEWERAGE WATER, SEWERAGE, GAS, AIR, OIL, CHEMICAL, INDUSTRIAL WATER v  END FLANGE STANDARD  :   IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5,       BS: 4504, AWWA C 207 OR ANY OTHER STANDARDv  TYPE OF DISC/FLAP  :   SOLID FLAP WITH INTEGRAL, HINGE, SEPARATE HINGE,       ROTARY DISC, TILTIL DISC, PLUG TYPE, BALL LIFT,       THREE LEVER SWING. v  MANUFACTURING RANGE OF SIZE  :   NB 50 MM TO 600 MM DIA
Read More...
1542133780img1
Multidoor Type Non Return Valves
MULTIDOOR SWING TYPE REFLUX VALVE / NON RETURN VALVE is a device which restrict the flow in one direction only. Any tendency for the flow to reverse causes the flap come close prevent reflux of flow. Valve generally open through help of validity of upstream flow. Valves are generally used four Nos. doors to open in low velicity of flow. The multidoor reflux valves are used in a horizontal or vertical system. “KAMALA” Brand multidoor reflux valves are hydrodynamically proven and specially developed for modern conditions on pump discharge and public utility service. v  PARENT / BASIC MATERIAL: CAST IRON, S.G. IRON, CAST STEEL, FABRICATEDv  TYPE OF CONSTRUCTION: 4 DOOR SWING CHECK WITH INBUILT DUCK FOOTv  MANUFACTURING STANDARD  : IS: 5312/PART-II (NB 600 MM TO 1200 MM)v  CENTRAL FLUID APPLICATION: CLEAR WATER, IRRIGATION RAW WATER, SEWAGE WATERv  END FLANGE STANDARD  :  IS: 1538, IS: 6392, BS: 4504, BS: 10, ANSI B 16.1, ANSI B 16.5 OR ANY OTH. STDv  TYPE OF FLAP / DISC: SOLID FLAP WITH INTEGRAL HINGE, SEPARATE HINGEv  MANUFACTURING RANGE: NB 500  MM TO 2000 MMv  RATING  :  PN-04., PN-1.0 & PN-1.6
Read More...
1542134369img1
Wafer Type Butterfly Valve
“BUTTERFLY VALVE” is a hydro-mechanical device to isolate/control the flow medium in both directions & also typically used to regulate a fluid. In a robust construction of double flanged body one Stainless steel seat ring is fitted in the flow path. A robust circular disc is positioned in the centre of the body. The disc is mounted on two hub stub shaft which is swing through both end body housing. A resilient/stainless steel seat ring moves inside the disc & one disc seat retainer is placed to retain it. A Gear/hand lever operated drive shaft. At the time of sealing action the contracting seating surface effect the sealing and ensuring leak proof sealing. In full open position it facilitate low interrupted reduce bore flow path resulting minor / low headloss.v  Manufacturing Standard  :  IS: 13095, BS: 5155, BS: 3952, API: 609, AWWA C 504, DIN: 3354v  Basic Materials: Cast Iron, S.G. Iron, Mild Steel Fabricated, Cast Steel v  Type of Construction on shaft: Double eccentric, Concentric v  Construction of blade design: Flats lab blade, Spherical blade, Conical blade, Lattice blade sealv  Construction of Discseal: Flat round nose, “L” round nose, “I” round nose, Self energising seal, Musical note seal, House seal, “V”       nose T shape seal, Metal to metal deposited seal, Metal to Metal flexible seat seal, Double seal.v  Construction of Body: Double flanged short, Double flanged long, Wafer short, Wafer medium, Wafer long,  v  Construction of End Connection: Double Flanged, Wafer, Lugged Screw, Lugged through bolt  v  Type of Seat: Metal to rubber resilient seat, Slim seal Resilient seat v  Type of Operation: Manual hand lever, Single stage Worm Gear Box, Double Stage Worm & Spur Gear Box, Triple stage Worm, Electric actuator, Pneumatic actuator, Pneumatic double acting, cylinder (push-pull), Hydraulic actuator/cylinderv  End Flange Standard  :  IS: 1538, IS: 6392, BS: 10, ANSI B 16.1, DIN Std., ANSI B 16.5, BS: 4504, AWWA C 207 or any other standard v  Manufacturing Range: 50 mm to 2600 mmv  Rating  :  PN-0.4, PN-1.0 & PN-1.6v  General fluid application: Clear water, Gas, Air, Oil, Chemical etc.
Read More...
1542134691img1
Double Air Valve
v PARENT/BSIC MATERIAL: CAST IRON, S.G. IRON, CAST  STEEL v  MANUFACTURING STANDARD: G&K CATALOGUE H-40 v  GENERAL FLUID APPLICATION: CLEAR WATER, RAW WATER, SEWERAGE WATER v  END FLANGE STANDARD:   IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504, AWWA C 207 v  MANUFACTURING RANGE OF SIZE: NB 40 MM TO 200 MM DIA (HIGHER SIZES ON REQUEST) v  RATING:   PN-1.0 / PN-1.6
Read More...