Mechanical Coupling - Industrial Valves and Industrial Flanged Pipes Manufacturer and Exporter | Kamala Valves & Engineering Pvt. Ltd., Howrah

Our Products

Industrial Valves

Pipe & Pipe Fittings

Showcase

Double Acting Air Valve

v PARENT/BSIC MATERIAL: CAST IRON, S.G. IRON, CAST STEEL

v MANUFACTURING STANDARD: G&K CATALOGUE H-7

v GENERAL FLUID APPLICATION: CLEAR WATER, RAW WATER, SEWERAGE WATER

v END FLANGE STANDARD: IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504, AWWA C 207

v MANUFACTURING RANGE OF SIZE: NB 40 MM TO 200 MM DIA (HIGHER SIZES ON REQUEST)

v RATING: PN-1.0 / PN-1.6

View More products

Kinetic Air Valve with Sluice Valve
KINETIC OPERATING PRINCIPLE: In the development of the Kinetic Air Release Valve hydrodynamic principles have been applied to produce a unique patented feature. Tow moving parts, the ball (float) seals the orifices but positively remains open during the exhausting of air. This valve is immediately closed when the water rises in the valve to lift the ball to the orifice seat for a drop tight closure. The kinetic air release valve as designed so that when the large orifice is open the ball in such a matter that a resultant pressure on the ball is downward and increase as the exhausting air velocity increase. Thus, air at any velocity can be discharged without the possibility of the valve blowing shut or collapsing the ball (float) even when the air is moving at its critical velocity.v PARENT/BSIC MATERIAL: CAST IRON, S.G. IRON, CAST STEELv TYPE OF CONSTRUCTION: KINETIC (FIG. H-42K)v MANUFACTURING STANDARD: G&K CAT. FIG. H-42Kv GENERAL FLUID APPLICATION: CLEAR WATER, RAW WATER, SEWERAGE WATER v END FLANGE STANDARD: IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504, AWWA C 207v MANUFACTURING RANGE OF SIZE: NB 40 MM TO 200 MM DIA (HIGHER SIZES ON REQUEST)v RATING : PN-1.0 / PN-1.6
Read More...

Kinetic Air Valve
KINETIC OPERATING PRINCIPLE: In the development of the Kinetic Air Release Valve hydrodynamic principles have been applied to produce a unique patented feature. Two moving parts, the ball (float) seals the orifices but positively remains open during the exhausting of air. This valve is immediately closed when the water rises in the valve to lift the ball to the orifice seat for a drop tight closure. The kinetic air release valve as designed so that when the large orifice is open the ball in such a matter that a resultant pressure on the ball is downward and increase as the exhausting air velocity increase. Thus, air at any velocity can be discharged without the possibility of the valve blowing shut or collapsing the ball (float) even when the air is moving at its critical velocity.v PARENT/BSIC MATERIAL: CAST IRON, S.G. IRON, CAST STEELv TYPE OF CONSTRUCTION: KINETIC (FIG. DK)v MANUFACTURING STANDARD: IS: 14845, FIG. DK v GENERAL FLUID APPLICATION: CLEAR WATER, RAW WATER, SEWERAGE WATER v END FLANGE STANDARD: IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504, AWWA C 207v MANUFACTURING RANGE OF SIZE: NB 40 MM TO 200 MM DIA (HIGHER SIZES ON REQUEST)v RATING : PN-1.0 / PN-1.6
Read More...

Single Air Valve
v PARENT/BSIC MATERIAL : CAST IRON, S.G. IRON, CAST STEEL v MANUFACTURING STANDARD : IS: 14845, FIG. S-1, S-2 & G&K CAT. FIG. H-4 v GENERAL FLUID APPLICATION : CLEAR WATER, RAW WATER, SEWERAGE WATER v END FLANGE STANDARD : IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504, AWWA C 207 v MANUFACTURING RANGE OF SIZE : NB 15 MM TO 40 MM DIA (HIGHER SIZES ON REQUEST) v RATING : PN-1.0 / PN-1.6
Read More...

Tamper Proof Air Valves
v PARENT/BSIC MATERIAL : CAST IRON, S.G. IRON, CAST STEEL v MANUFACTURING STANDARD : AWWA C512 OR CUSTOMER REQUIREMENTS v GENERAL FLUID APPLICATION : CLEAR WATER, RAW WATER, SEWERAGE WATER v END FLANGE STANDARD : IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504, AWWA C 207 v MANUFACTURING RANGE OF SIZE : NB 40 MM TO 200 MM DIA (HIGHER SIZES ON REQUEST) v RATING : PN-1.0 / PN-1.6
Read More...

Float Valves
v PARENT/BSIC MATERIAL: CAST IRON, S.G. IRON, CAST STEEL v TYPE OF CONSTRUCTION: PILOT OPERATED FLOAT VALVES. v MANUFACTURING STANDARD: G&K CATALOGUE FIG. H-48 v GENERAL FLUID APPLICATION: CLEAR WATER, RAW WATER, SEWERAGE WATER v END FLANGE STANDARD IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504 OR CUSTOMER’S REQUIREMENT v MANUFACTURING RANGE OF SIZE: NB 50 MM DIA TO 450 MM DIA v RATING : PN-1.0 / PN-1.6
Read More...

Dual Plate Check Valve
“KAMALA”/”KCE” Make Dual Plate Check Valve is high performance multi purpose check valve. It is stronger, lighter and smaller than conventional swing check valve. The valve provides two spring compressed on plates and housed on a vertical hinge pin. When the flow decrease, the plates closed rapidly by torsion spring action without requiring reverse flow. The dual plate check valve uses a special unique design spring for significant improvement in valve response. Each valve has its own two springs or no. of springs which provide independent closing action. This design overcomes the problems of either dual plates where both plates are closed by opposite legs of a single spring and where disparate forces acting on each plate cause the plates to close unevenly. v PARENT / BASIC MATERIALS : CAST IRON, S.G. IRON, CAST STEEL, STAINLESS STEEL, M.S. FABRICATEDv TYPE OF CONSTRUCTION : FLANGE TYPE / WAFER TYPEv MANUFACTURING STANDARD : API-594, API-6D & API-598 (TESTING)v GENERAL FLUID APPLICATION : CLEAR WATER, GAS, AIR, OIL, CHEMICAL ETC.v END FLANGE STANDARD : IS: 1538, IS: 6392, BS: 10, ANSI B 16.1, ANSI B 16.5, BS: 4504, AWWA C 207 OR ANY OTHER STANDARDv TYPE OF DSC / FLAP : DOUBLE DOOR SOLID FLAT FLAP WITH INTEGRAL HINGEv MANUFACTURING RANGE : NB 50 MM TO 2000 MMv RATING : PN-2, PN-16, PN-10 & CLASS-150, CLASS-300
Read More...

Previous 123 4 5 6 Next

Our Products

Showcase

Get In Touch