Our Products

 

  Showcase

 

Double Flanged Non-Rising Sluice Valve

 

1542038018img1

SLUICE VALVES is a device to isolate the flow of medium in both directions. In a robust body two nos. body seat ring are fitted in the flow path. A wedge moves inside the body of guided by integral channel. The stem and stem-nut engage the wedge properly. At the time of wedging action the contracting seating surface effect the sealing and ensuring leak proof sealing. In full open position it facilitate clear uninterrupted full bore flow path resulting minor/low headloss.


v  PARENT/BASIC MATERIAL  : CAST IRON, S.G. IRON, CAST STEEL
v  TYPE OF CONSTRUCTION  : INSIDE SCREW, NON-RISING STEM
v  MANUFACTURING STANDARD  : IS: 14846, BS: 5150, BS: 5163, BS:1735,

    API:600, AWWAC500, DIN: 3352

v  GENERAL FLUID APPLICATION  : CLEAR WATER, GAS, AIR, OIL, CHEMICAL ETC.
v  END FLANGE STANDARD  : IS: 1538, IS: 6392, BS: 10, ANSI B 16.1,     ANSI: B16.5, BS: 4504, AWWA C 207 OR ANY     OTHER STANDARD
v  TYPE OF WEDGE  : SOLID & TAPER, FLEXIBLE, SINGLE DISC.
v  MANUFACTURING RANGE OF SIZE  : NB 40 MM TO 2500 MM

v  RATING  : PN 0.4, PN-1.0 & PN-1.6





View More products
1542136894img1
Foot Valve
FOOT VALVE is a device which allow to come the flow in one direction. This type of valves are generally placed at the lower end of suction pipe of pump to prevent the suction pipe from empting while the pump is stop. Consequently when the pump is first started it dose not have to exhaust the air from the suction pipe as a result that prompt starting of the pump is secured.v  PARENT / BASIC MATERIALS  :  CAST IRON, S.G. IRON, CAST STEEL, STAINLESS STEELv  TYPE OF CONSTRUCTION   :  FLANGE END / SCREWED END, LIFT / SWING TYPE DISC FOOT CHECK VALVE WITH C.I. / M.S. STRAINERv  MANUFACTURING STANDARD  :   IS: 4038, IS: 10805v  GENERAL FLUID APPLICATION  :  CLEAR WATER, GAS, AIR, OIL, CHEMICAL ETC.v  END FLANGE STANDARD  :  IS: 1538, IS: 6392, BS: 10, ANSI B 16.1, ANSI B 16.5, BS: 4504, AWWA C 207 OR ANY OTHER STANDARDv  TYPE OF DSC  :   SINGLE DISC SWING AND LIFT, DOUBLE DISC SWING AND LIFTv  MANUFACTURING RANGE  :   NB 25 MM TO 450 MMv  RATING  :  PN-2, PN-16 & PN-10v  STRAINING AREA  :   AT LEAST EQUAL TO 2.5 TIMES OF THE NOMINAL BORE AREA
Read More...
1542137405img1
Pressure Release Valve
v  PARENT/BSIC MATERIAL       :   CAST IRON, S.G. IRON, CAST  STEEL v  TYPE OF CONSTRUCTION          :   SPRING LOADED ANGLE TYPE v  MANUFACTURING STANDARD  :   G&K CATALOGUE FIG. H-19/H-20 v  GENERAL FLUID APPLICATION  :   CLEAR WATER, RAW WATER, SEWERAGE WATER v  END FLANGE STANDARD         :   IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504, AWWA C 207 v  MANUFACTURING RANGE OF SIZE    :   NB 50 MM TO 300 MM DIA (HIGHER SIZES ON REQUEST) v  RATING         :   PN-1.0 / PN-1.6
Read More...
1542137845img1
Sluice Gate
SLUICE GATES FOR OPEN CHANNEL FLOW CONTROLOne singular property of channel mounted gates is the level of water/waste water is always less than the door height/height of the channel. Also, as far as practicable, the bottom opening of the gate is flush with the invert, save probably for the width of the metal seat if the entire gate has metal to metal seating. Seating is only on the two vertical sides and the bottom. And here is a yoke/bridge which binds the entire frame together imparting rigidity. The operating mechanism comprising of a threaded nut for the rising spindle, a ball thrust bearing arrangement (optional) gearbox if required, is mounted on top of the yoke/bridge.Available in 3 basic construction material. v   Cast Iron Split Frame (IS: 210 Fg. 200 / 260)v   Fabricated Mild Steel (IS: 2062)v   Fabricated Stainless Steel (AISI 304 / 316) Essential Featuresv Wedging action (2 sides) in C.I. / M.S. and Stainless Steel Gates.v While sealing on all 3 sides is metal to Metal – Bronze / Brass for C.I. Gates and Stainless Steel for Fabricated M.S. Or Stainless Steel Gates. This option is available for M.S. and Stainless Steel Gates also.v Sides of guide/frame are embedded in concrete or side walls of the channel.v When required, remote operation using a coupling, extension rod and operating gear atop a headstock, is possible.v Electric or Pneumatic operation is possible.v suitable for seating as well as off seating application.
Read More...
1542138188img1
Fire Hydrant
v PARENT/BSIC MATERIAL: CAST IRON, S.G. IRON, CAST  STEEL v  TYPE OF CONSTRUCTION: UNDERGROUND TYPE FIRE HYDRANT WITH SLUICE VALVES, DUCKFOOT BEND, DOUBLE FLANGE PIPE, CAP ETC. v  MANUFACTURING STANDARD: IS: 909 & OTHER STANDARD     v  GENERAL FLUID APPLICATION: CLEAR WATER, RAW WATER, SEWERAGE WATER v  END FLANGE STANDARD: IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504 (SLUICE VALVES) OR CUSTOMER’S REQUIMENT v  MANUFACTURING RANGE OF SIZE: NB 80 MM DIA v  RATING:   PN-1.0 / PN-1.6
Read More...
1542138436img1
Globe Valves
v  PARENT/BSIC MATERIAL: CAST IRON, S.G. IRON, CAST  STEEL v  TYPE OF CONSTRUCTION: FLANGE TYPE v  MANUFACTURING STANDARD  :   IS: 9338 OR ANY OTHER STANDARD v  GENERAL FLUID APPLICATION: CLEAR WATER, RAW WATER, SEWERAGE WATER v  END FLANGE STANDARD         :   IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504 v  MANUFACTURING RANGE OF SIZE: NB 50 MM TO 300 MM DIA (HIGHER SIZES ON REQUEST) v  RATING        :   PN-1.0 / PN-1.6
Read More...
1542138579img1
Diaphragam Valve

Read More...