Our Products

 

  Showcase

 

Double Flanged Non-Rising Sluice Valve

 

1542038018img1

SLUICE VALVES is a device to isolate the flow of medium in both directions. In a robust body two nos. body seat ring are fitted in the flow path. A wedge moves inside the body of guided by integral channel. The stem and stem-nut engage the wedge properly. At the time of wedging action the contracting seating surface effect the sealing and ensuring leak proof sealing. In full open position it facilitate clear uninterrupted full bore flow path resulting minor/low headloss.


v  PARENT/BASIC MATERIAL  : CAST IRON, S.G. IRON, CAST STEEL
v  TYPE OF CONSTRUCTION  : INSIDE SCREW, NON-RISING STEM
v  MANUFACTURING STANDARD  : IS: 14846, BS: 5150, BS: 5163, BS:1735,

    API:600, AWWAC500, DIN: 3352

v  GENERAL FLUID APPLICATION  : CLEAR WATER, GAS, AIR, OIL, CHEMICAL ETC.
v  END FLANGE STANDARD  : IS: 1538, IS: 6392, BS: 10, ANSI B 16.1,     ANSI: B16.5, BS: 4504, AWWA C 207 OR ANY     OTHER STANDARD
v  TYPE OF WEDGE  : SOLID & TAPER, FLEXIBLE, SINGLE DISC.
v  MANUFACTURING RANGE OF SIZE  : NB 40 MM TO 2500 MM

v  RATING  : PN 0.4, PN-1.0 & PN-1.6





View More products
1542135227img1
Kinetic Air Valve
KINETIC OPERATING PRINCIPLE: In the development of the Kinetic Air Release Valve hydrodynamic principles have been applied to produce a unique patented feature. Two moving parts, the ball (float) seals the orifices but positively remains open during the exhausting of air. This valve is immediately closed when the water rises in the valve to lift the ball to the orifice seat for a drop tight closure. The kinetic air release valve as designed so that when the large orifice is open the ball in such a matter that a resultant pressure on the ball is downward and increase as the exhausting air velocity increase. Thus, air at any velocity can be discharged without the possibility of the valve blowing shut or collapsing the ball (float) even when the air is moving at its critical velocity.v PARENT/BSIC MATERIAL: CAST IRON, S.G. IRON, CAST  STEELv  TYPE OF CONSTRUCTION: KINETIC (FIG. DK)v  MANUFACTURING STANDARD:   IS: 14845, FIG. DK v  GENERAL FLUID APPLICATION: CLEAR WATER, RAW WATER, SEWERAGE WATER v  END FLANGE STANDARD:   IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504, AWWA C 207v  MANUFACTURING RANGE OF SIZE: NB 40 MM TO 200 MM DIA (HIGHER SIZES ON REQUEST)v  RATING        :   PN-1.0 / PN-1.6
Read More...
1542135473img1
Double Acting Air Valve
v PARENT/BSIC MATERIAL: CAST IRON, S.G. IRON, CAST  STEEL v  MANUFACTURING STANDARD: G&K CATALOGUE H-7 v  GENERAL FLUID APPLICATION: CLEAR WATER, RAW WATER, SEWERAGE WATER v  END FLANGE STANDARD:   IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504, AWWA C 207 v  MANUFACTURING RANGE OF SIZE: NB 40 MM TO 200 MM DIA (HIGHER SIZES ON REQUEST) v  RATING:   PN-1.0 / PN-1.6
Read More...
1542135697img1
Single Air Valve
v PARENT/BSIC MATERIAL       :   CAST IRON, S.G. IRON, CAST  STEEL v  MANUFACTURING STANDARD       :   IS: 14845, FIG. S-1, S-2 & G&K CAT. FIG. H-4 v  GENERAL FLUID APPLICATION  :   CLEAR WATER, RAW WATER, SEWERAGE WATER v  END FLANGE STANDARD    :   IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5,  BS: 4504, AWWA C 207 v  MANUFACTURING RANGE OF SIZE  :   NB 15 MM TO 40 MM DIA (HIGHER SIZES ON REQUEST) v  RATING       :   PN-1.0 / PN-1.6
Read More...
1542135906img1
Tamper Proof Air Valves
v PARENT/BSIC MATERIAL      :   CAST IRON, S.G. IRON, CAST  STEEL v  MANUFACTURING STANDARD          :   AWWA C512 OR CUSTOMER REQUIREMENTS v  GENERAL FLUID APPLICATION    :   CLEAR WATER, RAW WATER, SEWERAGE WATER v  END FLANGE STANDARD         :   IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5,  BS: 4504, AWWA C 207 v  MANUFACTURING RANGE OF SIZE    :  NB 40 MM TO 200 MM DIA (HIGHER SIZES ON REQUEST) v  RATING         :   PN-1.0 / PN-1.6
Read More...
1542136121img1
Float Valves
v PARENT/BSIC MATERIAL: CAST IRON, S.G. IRON, CAST  STEEL v  TYPE OF CONSTRUCTION: PILOT OPERATED FLOAT VALVES. v  MANUFACTURING STANDARD: G&K CATALOGUE FIG. H-48 v  GENERAL FLUID APPLICATION: CLEAR WATER, RAW WATER, SEWERAGE WATER v  END FLANGE STANDARD    IS: 1538, IS: 6392, BS: 10, ANSI B16.1, ANIS B 16.5, BS: 4504 OR CUSTOMER’S REQUIREMENT  v  MANUFACTURING RANGE OF SIZE: NB 50 MM DIA TO 450 MM DIA v  RATING :   PN-1.0 / PN-1.6
Read More...
1542136669img1
Dual Plate Check Valve
“KAMALA”/”KCE” Make  Dual Plate Check Valve is high performance multi purpose check valve. It is stronger, lighter and smaller than conventional swing check valve. The valve provides two spring compressed on plates and housed on a vertical hinge pin. When the flow decrease, the plates closed rapidly by torsion spring action without requiring reverse flow. The dual plate check valve uses a special unique design spring for significant improvement in valve response. Each valve has its own two springs or no. of springs which provide independent closing action. This design overcomes the problems of either dual plates where both plates are closed by opposite legs of a single spring and where disparate forces acting on each plate cause the plates to close unevenly. v  PARENT / BASIC MATERIALS    :  CAST IRON, S.G. IRON, CAST STEEL, STAINLESS STEEL, M.S. FABRICATEDv  TYPE OF CONSTRUCTION   :  FLANGE TYPE / WAFER TYPEv  MANUFACTURING STANDARD  :   API-594, API-6D & API-598 (TESTING)v  GENERAL FLUID APPLICATION  :  CLEAR WATER, GAS, AIR, OIL, CHEMICAL ETC.v  END FLANGE STANDARD  :  IS: 1538, IS: 6392, BS: 10, ANSI B 16.1, ANSI B 16.5, BS: 4504, AWWA C 207 OR ANY OTHER STANDARDv  TYPE OF DSC / FLAP  :   DOUBLE DOOR SOLID FLAT FLAP WITH INTEGRAL  HINGEv  MANUFACTURING RANGE  :   NB 50 MM TO 2000 MMv  RATING  :  PN-2, PN-16, PN-10 & CLASS-150, CLASS-300
Read More...